PSOC™ Automotive Multitouch Gen6XL

• 32-bit Arm® Cortex™ CPU
• Register-configurable
• Noise-suppression technologies for display and EMI
  • Effective 20-V drive for higher signal-to-noise ratio (SNR)
  • AutoArmor™ improves both electromagnetic emissions and immunity
  • External display synchronization
• Water rejection and wet-finger tracking using DualSense™
• Multi-touch glove with automatic mode switching
  • Ten fingers with thin glove (≤1-mm thick)
  • Two fingers with thick glove (≤5-mm thick)
• Fingernail tracking
• Large object rejection
• Automatic baseline tracking of environmental changes
• Field upgrades via bootloader
• Cypress Manufacturing Test Kit (MTK)
• Touchscreen sensor self-test
• Low power wake-up button (<50 µA)
• Low power wake-on-touchscreen with a power consumption of
• 120 µA

• Screen sizes up to 15-inch diagonal
  • 6-mm sensor pitch; 16:10 aspect ratio
• Up to 88 sense pins
  • 1836 intersections, 16:10 aspect ratio (34 TX × 54 RX)
• Reports up to 10 fingers
• Small-finger support down to 5 mm
• Support up to 24 capacitive sensing buttons
• Large-finger support up to 22 mm
• Refresh rate up to 250 Hz; other rates configurable
• TX frequency up to 350 kHz

• 71- to 1.95-V digital and I/O supply and 3.0- to 5.5-V logic and digital I/Os supply
• 0- to 5.5-V analog supply
• 30-mW average power while sensing
  • 30-μW typical deep-sleep power

Supports a variety of touchscreen sensors and stack-up

• Manhattan and diamond patterns
• Sensor-on-lens (SOL)
• Plastic (PET) and glass sensor substrates
• LCD and AMOLED display
• Metal mesh

• I2 C slave at 100 and 400 kbps
• SPI slave bit rates up to 8 Mbps

• 56-pin QFN wettable flank, 8 × 8 × 1 mm, 0.5-mm pin-pitch
• 64-pin TQFP 1       0 × 10 × 1.4 mm (0.5-mm pitch)
• 100-pin TQFP, 14 × 14 × 1.4 mm, 0.5-mm pin-pitch
• 128-pin TQFP, 14 × 14 × 1.4 mm, 0.5-mm pin-pitch

• Automotive-A: –40 °C to 85 °C
• Automotive-S: –40 °C to 105 °C