EZ-PD™ CCG6 One-Port USB-C & PD Controller
USB-C power delivery with integrated VBUS load switch controller
EZ-PD™ CCG6 is Infineon's one-port USB-C and Power Delivery controller targeting PCs and notebooks. It integrates a VBUS provider path load switch controller along with USB authentication support, VBUS-to-CC short protection, VBUS-to-SBU short protection, 20 V-VBUS regulator, high-voltage PFET gate drivers, SBU and USB HS mux, VBUS over-voltage and over-current protection, and ESD protection.
EZ-PD™ CCG6 supports Downstream Facing Port (DFP), Upstream Facing Port (UFP), and Dual Role Port (DRP) and will fully support the power delivery 3.0 specification. It is a programmable solution with 128 KB flash supporting fail-safe boot up and firmware upgrade.
Infineon has USB Type-C and power delivery reference designs readily available online for various applications, which can be used to shorten design cycle times.
USB-C and Power Delivery 3.0 supporting USB and Thunderbolt, DisplayPort Alternate Mode platforms
Integrated digital blocks
- Two timers, counters, PWMs, and up to 17 GPIOs
- Four SCBs for configurable master/slave I²C, SPI or UART
Integrated analog blocks
- Load switch controller for provider path
- Integrated high-voltage 20 V-regulator
- SBU analog mux, USB analog mux
- VBUS-to-CC short protection
- VBUS-to-SBU short protection
- VCONN FETs supporting 600 mA
- High-side current sense amplifier across 5 mohms
- Legacy charge-detect block (BC v1.2, Apple charging)
- High-voltage PFET gate drivers
- VBUS discharge NFET
System-level fault protection
- Over-current, over-voltage, reverse-current and short-circuit protection
- VCONN over-current protection
Packages: 40-QFN (6x6 mm)
- Highly integrated Single port PD controller
- Supports VBUS to CC short protection
- PC Notebook and Desktops
- USB-C Dual Role Port (DRP)
- Watch the Type-C 101 Video Series
- Download the CCG6 datasheet
- Get your Schematics reviewed using the Online Tech Support Case system
