PROFET™ +12V | Automotive Smart High-Side Switch
PROFET™+ 12V is a scalable family of 12V high-side smart power switches with protection features and diagnosis for automotive applications
PROFET™+ 12 V family is characterized by its high short-circuit robustness and drives currents from 0.5 A to 11 A. The whole PROFET™+ 12 V high-side switch IC product family is pin-to-pin compatible within the family as well as with the PROFET™+ 24 V family. These intelligent power devices (IPD) support resistive, capacitive and inductive loads with higher energy capability.
- RDS(on) range 8-200 mΩ
- Up to 28 V operating voltage
- Up to 4 channels
- Automotive qualified, AEC-Q100
- Enhanced energy capability
- Current limitation
- Basic self-protection & diagnosis
- Analog current sense
- DSO-8/14/24 packages
- Compatible with PROFET™ + 24V
About PROFET™+ 12 V high-side smart power switch
Infineon’s PROFET™+ 12 V (PROtected FET) family consists of high-side smart power switches that provide state-of-the-art diagnostic and protection features such as:
- Very high short-circuit and energy robustness
- Protection against overload, overvoltage, and short-circuit
- Excessive temperature, loss of ground, power supply loss, and electrostatic discharge (ESD) protection.
In addition to the protection and diagnostic features, PROFET™+ 12 V has further benefits such as pin-compatibility of the PROFET™+ 12 V family with the PROFET™+ 24 V family and within each of the individual family devices.
About PROFET™+ 12 V high-side smart power switch family
Infineon’s PROFET™+12 V (PROtected FET) family consists of single, dual, and four-channel protected high-side power switches in DSO-8 and DSO-14 exposed pad packages. With an RDS(on) from 8 mΩ to 200 mΩ, they are capable of driving loads from 0.5 A up to 1 A. The automotive-qualified high-side switches are well-established in the market. This universal family is highly short-circuit robust and resistant against high energy from inductive loads. This intelligent power device is used for a lot of applications such as motors, relay replacements, valves, heating elements, and also loads with high input capacitance.
PROFET™+ 12V are automotive qualified protected high-side power switches integrating a DMOS power transistor and CMOS logic circuitry.
The 12V smart high-side switches with SMART6 technology are available as single, dual and 4-channel devices and offer an RDSon range from 8 mΩ to 200 mΩ and are capable to drive are capable to drive loads from 0.5A up to 10A. Infineon’s PROFET™+ 12V are available with PG-DSO-8 and PG-DSO-14 exposed pad package.
PROFET™+ 12V high-side switches drive resistive, inductive and capacitive loads from 0.5A up to 10A load current. The RoHS compliant and AEC qualified protected devices offer:
- very low stand-by-current (<0,5 µA)
- PWM capability up to 200Hz
- Load dump: 42V
- Operating battery: min= 4.1V; max= 28V
- 3.3V and 5V compatible logic inputs
Infineon offers various support materials:
- Data Sheets
- Evaluation boards (Motherboard and daughterboard)
- Arduino shield
- Config Wizard for IPD (Configuration and evaluation tool)
- Application Notes
- User Manual
PROFET™ devices from Infineon address all kind of loads and support with diagnosis and protection functions.
Following loads can be driven with Infineon PROFETTM+ 12V:
- Capacitive, such as LED modules
- Resistive, such as seat heating
- Inductive, such as solenoids
- Electronic, such as ECU
- Relay and fuse replacemet
PROFET™+ 12 V design support
Infineon offers a range of design-in materials, which include application notes, evaluation boards, PCB design data, simulation models, and also online simulations. Those materials can be found on each product page in the "Design Support" chapter. In addition, we offer a dedicated tool suite for smart power switches and gate driver ICs for automotive power distribution.
Infineon Smart Power Switches and Gate Driver Tool Suite support system architects and hardware designers from idea to realization. This suite allows the user to select the right smart power switch or gate driver IC for a specific load using one of the “Finder and Selection” tools. Together with different “Simulation and Modeling” tools, various application scenarios can be simulated for the product. The results can be documented in the report tool and verified with “Configuration” tools plus corresponding evaluation boards.
Facing a design challenge? The Infineon Developer Community is available 24x7 for you to connect and network with engineers across the globe. Get help from Infineon support engineers, and expert members to solve your design challenges anytime and from anywhere.
Infineon Developer Community is available 24x7 for you to connect and network with engineers across the globe. Get help from Infineon support engineers, and expert members to solve your design challenges anytime, from anywhere, in any topic, and in your preferred language.
PROFET™+ 12V are automotive qualified protected high-side power switches integrating a DMOS power transistor and CMOS logic circuitry.
The 12V smart high-side switches with SMART6 technology are available as single, dual and 4-channel devices and offer an RDSon range from 8 mΩ to 200 mΩ and are capable to drive are capable to drive loads from 0.5A up to 10A. Infineon’s PROFET™+ 12V are available with PG-DSO-8 and PG-DSO-14 exposed pad package.
The 12V smart high-side switches from Infineon provide state of the art diagnostic and protection features:
- very high short-circuit and energy robustness
- protection against overload, overvoltage and short-circuit
- excessive temperature, loss of ground, power supply loss and Electrostatic Discharge (ESD) protection
In addition to the protection and diagnostic features, PROFET™+ 12V have further benefits:
- pin-compatibility of the PROFET™+ 12V family with the PROFET™+ 24V family and within each of the individual family devices
- maximum design flexibility, due to identical footprint of the PG-DSO-8 and PG-DSO-14 package
- highest reliability in applications due to outstanding quality
- established and proven products for 10 years
PROFET™+ 12V high-side switches drive resistive, inductive and capacitive loads from 0.5A up to 10A load current. The RoHS compliant and AEC qualified protected devices offer:
- very low stand-by-current (<0,5 µA)
- PWM capability up to 200Hz
- Load dump: 42V
- Operating battery: min= 4.1V; max= 28V
- 3.3V and 5V compatible logic inputs
Infineon offers various support materials:
- Data Sheets
- Evaluation boards (Motherboard and daughterboard)
- Arduino shield
- Config Wizard for IPD (Configuration and evaluation tool)
- Application Notes
- User Manual
PROFET™ devices from Infineon address all kind of loads and support with diagnosis and protection functions.
Following loads can be driven with Infineon PROFETTM+ 12V:
- Capacitive, such as LED modules
- Resistive, such as seat heating
- Inductive, such as solenoids
- Electronic, such as ECU
- Relay and fuse replacemet
