CYW43012
1x1 Dual-band Wi-Fi 4 (802.11n) + Bluetooth® 5.4 combo
Infineon’s AIROC™ CYW43012 an ultra-low power single-chip, combo device features 1x1 dual-band 2.4 GHz and 5 GHz Wi-Fi 4 (802.11n) and Bluetooth® 5.4. With a low-power architecture, the CYW43012 is ideal for battery powered applications where best-in-class power consumption is critical. The CYW43012 provides 802.11ac friendliness by supporting 256-QAM (for 20 MHz channels in the 5 GHz band) enabling data rates up to 78 Mbps with 802.11ac access points. On-chip power amplifier and low-noise amplifiers are included for both the 2.4 and 5GHz bands.
-
Wi-Fi 4 (802.11n and 802.11ac-friendly) Dual-band (2.4/5 GHz)
-
1x1 SISO
-
MCS8 (256-QAM) for 20MHz channels, up to 78Mbps PHY data rate
-
Internal PA and LNA for both bands
-
Class 1 (100 m) and Class 2 (10 m) operation
-
Supports BDR (1Mbps), EDR (2/3Mbps), Bluetooth® LE (1/2Mbps)
-
PCM for audio data
- Complies with Bluetooth® core specification version 5.2
- Declaration ID D052250
- QDID 160357 - Component (Tested)
-
Best-in-class power consumption in active and power saving modes with MCU offload
-
SDIO v2.0 / v3.0 for WiFi with HCI over UART/SPI or embedded Bluetooth® host stack in ROM
-
Integrated IPv4/ IPv6 network stack on-chip
-
Support for both RTOS and Linux/Android (A-Class) host designs
-
40 GPIOs
-
2-wire SECI for external BT/LTE
-
3-wire GCI
-
106-ball WLBGA (3.76 x 4.43mm; 0.35mm pitch)
-
300-ball FCBGA (9 x 9mm, 0.4mm pitch)
-
251-pin WLCSP (3.76 x 4.43, 0.2mm pitch)
-
-20C to +70C
- Wearables
- Smart Home products using batteries
- IoT Edge Nodes