CY8CKIT-040
CY8CKIT-040 PSoC™ 4000 Pioneer Development Kit
The CY8CKIT-040 PSoC™ 4000 Pioneer Kit is intended for use as a development platform for hardware or software in a laboratory environment. The board is an open system design, which does not include a shielded enclosure. For this reason, the board may cause interference to other electrical or electronic devices in close proximity. In a domestic environment, this product may cause radio interference. In such cases, the user may be required to take adequate preventive measures. Also, this board should not be used near any medical equipment or RF devices.
The PSoC™ 4000 device offers high end CAPSENSE™ features at a low cost. The PSoC™ 4000 device family supports the industry’s best CAPSENSE™ technology. The CY8CKIT-040 kit enables CAPSENSE™ functionality by providing a Trackpad shield that plugs into the CY8CKIT-040 kit. Using this shield you can evaluate the industry’s best CAPSENSE™ to set/change LED colors and brightness on the PSoC™ 4000 Kit.
The CY8CKIT-040 PSoC™ 4000 Development Kit provides users a low cost development platform to design unique applications targeting the entry level PSoC™ 4 Arm Cortex-M0 devices. The CY8CKIT-040 PSoC 4000 Development Kit enables low cost devices with high end functionality. The CY8CKIT-040 development kit supports an open platform, enabling complete access to the PSoC™ 4000 device via onboard headers that support the Arduino hardware community. We enable programming, debugging, and serial bridge debugging via the onboard Arm Cortext-M3 PSoC™ 5LP device. The kit provides users with onboard memory storage via Infineon's non-volatile low cost F-RAM I2C memory device. Finally, the CY8CKIT-040 comes with a pluggable Trackpad shield and example projects to fully test and evaluate CapSense solutions. The CY8CKIT-040 is truly a high end development platform at a low cost.
The CY8CKIT-040 Kit enables the lowest cost Arm Cortex-M0 device and represents the lowest end of our PSoC™ 4 device family. Customers developing projects and designs using the PSoC™ 4000 device family have the ability to migrate their design to feature rich PSoC™ 4100 and 4200 devices easily and efficiently using the PSoC™ Creator development environment. The code and component migration will be handled by PSoC™ Creator by simply selecting your new target device in PSoC™ Creator, no fear of re-writing code or selecting new components. The device migration is smooth and intuitive.
- CY8CKIT-040 PSoC 4000 Pioneer Kit
- Trackpad Shield Board
- 6 Jumper Wires
- Quick Start Guide
- USB Cable
- To learn more about PSoC™ Creator and On-Demand trainings, please visit the PSoC™ Creator Training Page
- To learn and train on PSoC™, please visit here.
- Visit the PSoC™ 3/4/5 Code Examples page for a list of available PSoC™ Creator code examples across PSoC™ Creator, Applications notes and Kits
- To get started with PSoC™ 4, refer to AN79953 - Getting Started with PSoC™ 4
|
Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design. |
The PSoC™ 4000 Pioneer Kit is an easy-to-use and inexpensive development platform enabling you to create unique designs with the industry’s smallest Arm Cortex-M0 device, the PSoC™ 4 CY8C4000 device family. Featuring the PSoC™ 4000 device family with up to 16KB Flash and 2KB SRAM, this kit provides you the power of a low cost Arm device combined with the fully customizable analog and digital fabric of a PSoC™.