KIT_A2G_TC397_5V_TRB_S

Overview

Order Nr.:  KITA2GTC3975VTRBSTOBO1, Price: 1500,- EUR

With this general purpose AURIX™ TC397 evaluation board, customers can quickly start to developing, evaluating and testing their software. The TC397XX is mounted on a socket so that it can be easily changed, making it particularily suitable for early project development.

A downloadable User Manual helps with the installation, use, and configuration of the board and includes the schematics and the layout. ( see Documents section )

 

NEW :

FPGA HSSL Starter Kit 

KIT_A2G_TC397_TRB_S in combination with Xilinx's UltraScale+ MPSoC programmable device delivers the perfect combination to solve the rising safety and performance requirements in emerging automotive and industrial designs.

Summary of Features

  • Infineon’s AURIX™ TC397  in LFBGA-292 Package
  • FlexRay™ Transceivers
  • High Speed CAN Transceivers (CAN-FD capable) 
  • USB to UART bridge 
  • Ethernet Gigabit PHY
  • Serial Eeprom 
  • LIN Transceiver 
  • Crystal 20MHz (default) or External Clock
  • USB miniWiggler JDS for easy debugging
  • 8 Low Power Status LEDs
  • 8-DIP switches for configuration
  • access to all pins of controller
  • 100mm x 160mm (EURO-Board)

Connectors

The TC397 TriBoard offers a wide variety of connectors:

  • Standard power connector
  • Micro USB connector for ASC Interface (ASC0) and miniWiggler
  • RJ45 connector for Ethernet
  • 16-pin header for JTAG interface (OCDS)
  • 3 x 10-pin header for DAP, DAPE and DAP_SCR (DAPE only usable on Emulation Device)
  • 10pin (2x5) Header for LIN Transceiver (LIN)
  • 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
  • 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)
  • four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
  • optional ETK connector
  • optional 2 x 6pin (IEEE1394) Socket for HSCT
  • optional Aurora connector (only with Emulation Device)

Components

  • Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV
  • Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)
  • LED indicating safe state signal 2 from TLF35584
  • LED indicating /HDRST (ESR0) active state
  • LED indicating activ miniWiggler JDS
  • LED switched via DAS software
  • 2 x Infineon’s FlexRay™ Transceiver TLE9221SX
  • 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ
  • Infineon’s LIN-Transceiver TLE 7259-3GE
  • USB to UART bridge FT2232HL (FTDI)
  • Integrated 10/100/1000M Ethernet Precision Transceiver RTL8211FI-CG (Realtek)
  • 8 general purpose LEDs
  • 2K I 2C Serial Eeprom with EUI-48™  Node Identity (MICROCHIP)
  • Reset switch
  • Enable switch
  • Generic switch
  • 4-pin Dip switch
Support