KIT_AURIX_TC234LP_TRB - Infineon Technologies

概要

Order Nr.: KIT_AURIX_TC234LP_TRB
Price: 350,- EUR

The KIT_AURIX_TC234LP_TRB is a versatile tool, providing quick access to the capabilities of TriCore's powerful architecture. Applications can be developed easily. The Evaluation Board is equipped with a variety of memories and peripherals for connection to the environment. There is also an interface for the On Chip Debugging Features (OCDS1 and DAP). The kit also includes several sets of development tools, which are stored on the included Evaluation Board CD-ROM. The Evaluation Board allows easily the development of TriCore applications with the corresponding tools.

MCU Derivates: TC23xLA, TC23xLX, TC23xL

CPU Clock: 200 MHz

Including:

- Evaluation Board (TriBoard)
- USB cable
- Power Supply
- Extension Board
- Free TriCore Entry Tool Chain
- Getting Started, first 3 Steps to
- Install the Tools
- Set up your Hardware
- Write and debug your first Program

Multiple on-chip memories:
– All embedded NVM and SRAM are ECC protected
– 2 Mbyte Program Flash Memory (PFLASH)
– 128 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation
– 32 Kbyte Local Memory Unit(LMU)
– 512 Kbyte Memory EEPROM Emulcation Memory (EMEM)
– Boot ROM (BROM)
– 184 Kbyte Data Scratch-Pad RAM (DSPR)
– 8 Kbyte Instruction Scratch-Pad RAM (PSPR)
– 8 Kbyte Instruction Cache (ICACHE)

特長

Infineon’s TC2X4 (TC234, TC224) Controller in TQFP-144 Package with 0,4mm pitch
FlexRay Transceivers
Safety device (optional)
High Speed CAN Transceivers
USB to UART bridge
Ethernet Gigabit PHY(dependant of assembled Controller)
Serial Eeprom
LIN Transceiver
Crystal 20MHz (default) or External Clock
USB miniWiggler JDS for easy debugging
8 Low Power Status LEDs
8-DIP switches for configuration
access to all pins of controller
100mm x 160mm (EURO-Board)
optional power supply via USB

Connectors :

The TC2X4 TriBoard offers a wide variety of connectors

Standard power connector
Micro USB connector for ASC Interface (ASC0) and miniWiggler
RJ45 connector for Ethernet
16-pin header for JTAG interface (OCDS)
10-pin header for DAP
10pin (2x5) Header for LIN Transceiver (LIN)
2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
2 x 10pin (2x5) Header for FlexRay (ERAY-A and ERAY-B)
four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
optional ETK connector

Components: