REF_ICL8800_LED_43W
43W high power factor flyback converter with constant voltage output based on ICL8800
The REF_ICL8800_LED_43W is a 43W reference design featuring Infineon’s high power factor flyback controller ICL8800. The board is a constant voltage (CV) secondary-side regulated (SSR) system and is intended to be used with a constant current (CC) converter for LED lighting applications.
Two-stage topologies are growing because of the convenient scalability of power on the primary side and the features on the secondary side. REF_ICL8800_LED_43W is designed as plug-and-play solution and can be combined with secondary-side DC/DC boards.
As a default setup, the reference design board is assembled with a start-up circuit based on a depletion-mode MOSFET BSS126I on a very small adapter board. This setup offers the lowest standby losses. If low standby consumption is not necessary, the start-up circuit can be changed to a resistive start-up.
This reference design is provided with two regulation circuits. Both circuits are designed as plug-and-play solutions, but at least one has to be connected to the main board.
The two boards shall show the trade-off between cost; here the TL431 board offers a low-cost solution, and standby performance, while the op-amp board shows an overall 30mW better performance.
特長
- Constant voltage (CV) secondary-side regulated (SSR) reference design for LED lighting applications
- Power factor (PF) > 0.9 and THD < 10% across a wide load range (AC input up to 277Vrms)
- Maximum AC input voltage 90 – 305Vrms
- Critical conduction mode and quasi-resonant mode with smart valley hopping
利点
- Best fit topology for on/off LED driver with minimum dimming levels down to 5%
- Two-stage topology combines scalability with numerous features
- High light quality
- Cost-effective and bottom-up design
- Flexibility and low BOM for many applications
推奨アプリケーション例
- LED lighting
- Dimmable LED driver including dim-to-off
- LED driver and luminaires up to 125W
- Adapter and charger, flat TV, all-in-one PC, monitors up to 125W
With its benchmarking performance in power factor correction and total harmonic distortion at full-load and low-load conditions, ICL8800 enables window drivers and platform designs. Furthermore, the IC combines optimum efficiency and low EMI without compromising light quality.
Being the cost-optimized, basic-featured variant of the ICL88xx family, ICL8800 is the perfect fit for on-off drivers and dimming down to 5 percent.
For advanced features and more applications check out ICL8810, ICL8820 and the respective boards REF_ICL8810_LED_43W_BM and REF_ICL8820_LED_43W_JT.
For primary-side regulation of the single-stage flyback LED controller-family ICL88xx choose REF_ICL8810_LED_42W_PSR.
特長
- Constant voltage (CV) secondary-side regulated (SSR) reference design for LED lighting applications
- Power factor (PF) > 0.9 and THD < 10% across a wide load range (AC input up to 277Vrms)
- Maximum AC input voltage 90 – 305Vrms
- Critical conduction mode and quasi-resonant mode with smart valley hopping
利点
- Best fit topology for on/off LED driver with minimum dimming levels down to 5%
- Two-stage topology combines scalability with numerous features
- High light quality
- Cost-effective and bottom-up design
- Flexibility and low BOM for many applications
推奨アプリケーション例
- LED lighting
- Dimmable LED driver including dim-to-off
- LED driver and luminaires up to 125W
- Adapter and charger, flat TV, all-in-one PC, monitors up to 125W
List of components
- Single-stage flyback LED controller for constant voltage output
(ICL8800) - 800V CoolMOS™ P7 superjunction MOSFET
(IPD80R900P7) - 600V N-Channel small signal depletion-mode MOSFET
(BSS126I)
Modular lighting boards
At Infineon we offer a broad variety of primary side ACDC and secondary side DCDC boards dedicated to LED lighting. The LED lighting boards can easily be stacked together for plug-and-play solutions.
